The welding fume exhaust kit consisting of boom, exhaust arm and fan is a particularly simple and cost-effective solution anywhere where air filtration is not essential. Due to the length, flexible, fast work is very easy, even with large workpieces. It is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or vehicle exhaust fumes in non-stop operation.

The KEMPER extraction arm permits a long reach. It is used either for a single work station in conjunction with a fan or for multi-user stations using tubes connected to a central extraction and filter system. The exhaust arm is designed for continuous use and is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or motor vehicle exhaust fumes.

The KEMPER pivoting arm is suitable for flexibly separating work and factory areas by means of protective welding curtains and is designed for mounting on a wall. The preferred hanging height can be chosen as desired.

The KEMPER pivoting arm is suitable for flexibly separating work and factory areas by means of protective welding curtains or strips and is designed for mounting on a wall. The preferred hanging height can be chosen as desired.

The KEMPER pillar-mounted pivoting arm is suitable for flexibly separating work and factory areas by means of protective welding curtains and is designed for mounting on a pillar. The height of the pillar depends on the length of the pivoting arm which is available from 2 to 6 m.

The KEMPER pillar-mounted pivoting arm is suitable for flexibly separating work and factory areas by means of protective welding curtains and strips and is designed for mounting on a pillar. The height of the pillar depends on the length of the pivoting arm which is available from 2 to 6 m.

Wall and pillar-mounted pivoting arms with locking and telescoping facility from KEMPER are suitable for flexibly separating work and factory areas by means of protective welding curtains or strips and are designed for mounting on a wall or pillar. The locking protects people and equipment against accidental dislodgement of the pivoting arm. Because of the telescoping facility, suspension can be flexibly and easily extended.

​

​

​

​

​

​

​

KEMPER exhaust arms unite high flexibility with ergonomic and safe workplace design. They can be used to extract welding smoke, gases and vapours as well as light dusts or solvents. With arms extending up to 6 meters, they are suitable for many different environments.

The KEMPER extraction arm permits a long reach. It is used either for a single work station in conjunction with a fan or for multi-user stations using tubes connected to a central extraction and filter system. The exhaust arm is designed for continuous use and is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or motor vehicle exhaust fumes.

Exhaust arms on the extraction channel combined long reach with very simple and smooth positioning. Several exhaust arms can be connected to one duct. The exhaust arms are designed for continuous use and are suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or motor vehicle exhaust fumes.

The KEMPER exhaust arm is suitable for retrofitting to existing equipment, on work tables or other extraction devices. It is designed for continuous use and is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or motor vehicle exhaust fumes.

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin housing the fan is particularly quiet and spark-proof.

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin housing the fan is particularly quiet and spark-proof.

Central fans are the ideal solution when large amounts of air need to be moved. They are put to use in combination with duct on welding fume extraction tables, hoods and arms. Fans are used everywhere to vent where filtering the air is not important.

A universal, mobile solution for a variety of ventilation applications where filtering the air is not important. It is extremely quiet and is suitable for the extraction of e.g. welding fumes or car exhaust gases as well as for the fresh air ventilation of containers, pipes or manholes.

A universal, mobile solution for a variety of ventilation applications where filtering the air is not important. It is extremely quiet and is suitable for the extraction of e.g. welding fumes or car exhaust gases as well as for the fresh air ventilation of containers, pipes or manholes.

The welding fume exhaust kit consisting of exhaust arm and fan is a particularly simple and cost-effective solution anywhere where air filtration is not essential. It is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or vehicle exhaust fumes in non-stop operation.

The welding fume exhaust kit consisting of boom, exhaust arm and fan is a particularly simple and cost-effective solution anywhere where air filtration is not essential. Due to the length, flexible, fast work is very easy, even with large workpieces. It is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or vehicle exhaust fumes in non-stop operation.

The welding fume exhaust kit consisting of boom, exhaust arm and fan is a particularly simple and cost-effective solution anywhere where air filtration is not essential. Due to the length, flexible, fast work is very easy, even with large workpieces. It is suitable for high levels of smoke and dust such as welding fumes, gases, vapours, light dusts or vehicle exhaust fumes in non-stop operation.

Our grinding table with downdraft and rear wall spark and air fume extraction is a clean and safe solution for industrial use. The grinding table can be connected to a central air extraction system and the table is available in different sizes. The sound-insulated side walls can be folded away when machining large workpieces.

Welding Tables from KEMPER are the ideal solution for welding together of small metal parts by hand. A slag tray allows for easy cleaning of the table and the table is connected to an extraction system via pipework. Extraction can also be carried out via an optional fan.

Welding Tables from KEMPER are the ideal solution for welders for connecting small metal steel parts by hand. A slag tray allows for easy cleaning of the welding table. The extraction is carried out by means of a fan that is mounted externally on the table.

The FilterTable extraction is an affordable combination of working table and welding smoke extraction filter unit. The large work surface allows for effective work during welding and grinding with low to medium levels of smoke and dust. The unit with disposable filter is designed for low to medium levels of smoke and dust and for occasional to frequent use.

The KEMPER hand cutting table is ideal for machining small metal parts by hand. The integrated slag tray allows for easy cleaning of the table.

The KEMPER Tavolextisch is specifically designed for hand cutting training in schools and workshops. The flamecutter can be held in the clamp so that the operator has both hands free. Simple cleaning of the table is ensured by the large slag drawer.

KEMPER training welding tables are designed for training welders. Flat and deep welding techniques are taught at the tables which are divided into two distinct work areas.

​

The KemTab extraction and cutting table is a solid and flexible solution for your plasma cutting operations with a capacity of up to 300 A and for materials up to 150 mm thick when using gas cutting. The modular design means many different table sizes can be created. Large slag trays ensure quick cleaning at longer cleaning intervals.

The KemTab Advance extraction and cutting table is a solid and flexible solution for your plasma cutting operations with a capacity of up to 300 A and for materials up to 150 mm thick when using gas cutting. The modular design means many different table sizes can be created. Large slag trays ensure quick cleaning at longer cleaning intervals.

KEMPER welding curtains offer protection against radiation, welding arcs and spatter. The curtains have reinforced hems all round to prevent tearing. The attached eyelets provide for easy installation.

KEMPER welding curtains offer protection against radiation, welding arcs and spatter. The curtains have reinforced hems all round to prevent tearing. The attached eyelets provide for easy installation.

Transparent protective curtains are used anywhere where no protection from UV radiation is necessary. They offer protection against dust, drafts, wet and grinding sparks. The curtains have reinforced hems and eyelets.

KEMPER welding curtains offer protection against radiation, welding arcs and spatter. The curtains have reinforced hems all round to prevent tearing. The attached eyelets provide for easy installation.

KEMPER's pivoting self retracting cable reel is a fast and space-saving solution for separating work areas. Mounted between two walls or pillars, the curtain can easily be folded up and folded aside when not needed.

KEMPER welding strip curtains ensure high-level protection against radiation, spatter and welding arcs. They conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. The curtains are mounted on a tube or a C-profile.

KEMPER welding strip curtains ensure high-level protection against radiation, spatter and welding arcs. They conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. The curtains are mounted on a tube or a C-profile.

Transparent protection strip curtains by KEMPER protect against dust, drafts, wet and spatter. They conform to DIN 53 438 T2 and are thus flame-retardant. The curtains are mounted on a tube or a C-profile.

KEMPER welding protection strips ensure best protection against radiation, spatter and welding arcs. They conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. The strips are cut to size and punched according to the desired overlap and are easily assembled with folding KEMPER suspension brackets.

KEMPER welding protection strips ensure best protection against radiation, spatter and welding arcs. They conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. The strips are cut to size and punched according to the desired overlap and are easily assembled with folding KEMPER suspension brackets.

KEMPER welding protection strips ensure best protection against radiation, spatter and welding arcs. They conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. The strips are cut to size and punched according to the desired overlap and are easily assembled with folding KEMPER suspension brackets.

KEMPER welding protection strips ensure best protection against radiation, spatter and welding arcs. They conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. The strips are cut to size and punched according to the desired overlap and are easily assembled with folding KEMPER suspension brackets.

KEMPER protection strips ensure best protection against dust, drafts, wet and grinding sparks. They are flame retardant as per DIN 53 438 T2. The strips are cut to size and punched according to the desired overlap and are easily assembled with folding KEMPER suspension brackets.

The one-panel protective screen with welding curtain fabric can be used flexibly thanks to the optionally available wheel kit. The KEMPER film curtain complies with DIN EN ISO 25980 and is fastened on the bar structure using metal hooks.

Due to their light weight, protective screens with welding curtain fabric can be set up flexibly and provide reliable protection against radiation, welding arcs and spatter.

The one-panel protective screen with strips can be used flexibly thanks to the optionally available wheel kit. The strips conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. Mounting is done using folding KEMPER suspension brackets.

The one-panel protective screen with welding strip curtain can be used flexibly thanks to the optionally available wheel kit. The KEMPER welding strip curtain complies with DIN EN ISO 25980 and is fastened on the bar structure using metal hooks. The material is flame retardant as per DIN 53 438 T2.

The three-panel protective screen with curtain fabric can be used flexibly thanks to the optionally available wheel kit. The KEMPER foil curtain complies with DIN EN ISO 25980 and is fastened on the bar structure using metal hooks.

The three-panel protective screen with strips can be used flexibly thanks to the optionally available wheel kit. The strips conform to DIN EN ISO 25980 and are flame retardant as per DIN 53 438 T2. Mounting is done using folding KEMPER suspension brackets.

The three-panel protective screen with welding strip curtain can be used flexibly thanks to the optionally available wheel kit. The KEMPER welding strip curtain complies with DIN EN ISO 25980 and is fastened on the bar structure using metal hooks or sliding hooks. The material is flame retardant as per DIN 53 438 T2.

​

KEMPER welding blankets ensure safe protection against welding splatter, flying sparks and grinding sparks. They withstand up to 550 °C under permanent exposure and briefly up to 750 °C

KEMPER welding blankets ensure safe protection against welding splatter, flying sparks and grinding sparks. They withstand up to 750 °C under permanent exposure and briefly up to 950 °C.

KEMPER welding blankets ensure safe protection against welding spatter, flying sparks, grinding sparks and slag. They withstand up to 1100 °C under permanent exposure and briefly up to 1,350°C.

KEMPER noise barriers are versatile in use - whether for partitioning factory buildings or as welding booths in schools and workshops. As they consist of various system elements, a wide variety of booth sizes can be created.

​

The basic mobile welding smoke extraction unit is designed for occasional use with low amounts of dust. The rotating and swiveling exhaust hood enables use in a 360-degree radius and ensures only few adjustments during welding. The basic device is suitable for welding high alloy steel due to its W3 approval.

ProfiMaster is a robust smoke extraction filter unit for occasional to frequent use with low to medium amounts of dust. The high capacity disposable filter can easily be changed. The rotating and swiveling exhaust hood enables use in a 360-degree radius and ensures only few adjustments during welding.

ProfiMaster is a robust smoke extraction filter unit for occasional to frequent use with low to medium amounts of dust. The high capacity disposable filter can easily be changed. The two-exhaust arm version with integral dampers allows simultaneous or alternating work in two places with adjustable extraction performance.

SmartFil is a mobile welding fume filtering unit for regular use in welding with medium amounts of fumes and dust. The disposable filter of the extraction unit has a particularly high filter surface of 25 m² and is changed completely contamination-free when saturated. SmartFil effectively protects the user from welding fumes and is particularly economical thanks to its long service life.

MaxiFil smoke extraction units combine large filter capacities with contamination-free filter change. With their high mobility and an operating radius of 360 degrees, they are ideal for regular use. The comfortable filter unit easily handles applications with medium amounts of smoke and dust.

MaxiFil filter devices combine large filter capacities with contamination-free filter changes. The extra activated charcoal filter absorbs gases and odors. Its high mobility and a 360-degree operating radius make it the ideal device for continuous use. The comfortable filter device effortlessly handles applications with medium amounts of smoke and dust.

A functional extraction filter unit with timed, automatic filter cleaning system for high levels of smoke and dust and permanent use. The KemTex® ePTFE membrane filter cartridge for ultra-fine dust particles separates particles even below 0.1 µm. Due to the W3/IFA Certification it is also suitable for use in processing chromium-nickel steel.

The welding smoke extraction unit MaxiFil Clean has a self-cleaning filter in combination with an automatic, contamination-freedust disposal. Its high mobility and a 360-degree operating radius make it the ideal device for continuous use. The simple filter unit easily handles applications with large amounts of smoke and dust.

Plug and play - Just configure the air purifier AirCO2NTROL once and clean the room air permanently and without hesitation with the best filter technology. Thanks to the permanent air volume flow control, AirCO2NTROL ensures a high and reliable six-fold air exchange per hour and this in rooms of up to 100m²in very quiet continuous operation. The automatic motion sensor enables carefree operation without having to think about switching the unit on and off.

Original storage filter as filter cassette with 13 m² filter surface for the SmartMaster extraction unit. The filter class is E12 with a filtration efficiency ≥ 99.5 %. Important note: When using original filters, you are on the safer side and act in a legally compliant manner, as this means that the IFA W3 certification and the warranty of your unit remain intact and valid.

With the original storage filter for the ProfiMaster, you get the highest welding fume separation with the lowest energy consumption. The filter cassette has a filter area of 17 m² and the filter class is E12 with a separation rate ≥ 99.5 %. Important note: When using original filters, you are on the safer side and act in a legally compliant manner, as this means that the IFA W3 certification and the warranty of your unit remain intact and valid.

The original storage filter for the SmartFil extraction unit ensures optimum coordination between filter technology and filter unit. The roll filter has a filter surface of 25 m² and the filter class is E12 with a filtration efficiency ≥ 99.9 %. Important note: When using original filters, you are on the safer side and act in a legally compliant manner, as this means that the IFA W3 certification and the warranty of your unit remain intact and valid.

The KEMPER original storage filter is suitable for the MaxiFil (mobile and stationary), SmartFil and WallMaster units. The XXL filter surface of 42 m² of the roll filter offers the highest welding fume separation with the lowest energy consumption. The filter class is E12 with a separation efficiency ≥ 99.9 %. Important note: When using original filters, you are on the safer side and act in a legally compliant manner, as this means that the IFA W3 certification and the warranty of your unit remain intact and valid.

The original storage filter set for the MaxiFil ensures optimum coordination between filter technology and filter unit. The coil filter has a filter area of 34 m² with a filtration efficiency of ≥ 99.9 %. It is used in combination with a pre-filter (aluminium mesh) and activated carbon filter in the unit. Important note: If you use original filters, you are on the safer side because the warranty of your unit remains valid.

The original storage filter for the MaxiFil ensures optimum coordination between filter technology and filter unit. The coil filter has a filter surface of 34 m² with a filtration efficiency of ≥ 99.9 %. Important note: When using original filters, you are on the safer side because the warranty of your unit remains valid.

Original activated carbon filter from KEMPER for reducing gases and odours. The filter is used in the MaxiFil extraction unit. The activated carbon filling weight is 7.8 kg. Important note: If you use original filters, you are on the safer side, because the warranty of your appliance remains valid.

10 m² original replacement filter cartridge made of polyester fleece with innovative surface filtration with KemTex® ePTFE membrane and dust class M for KEMPER FilterMaster XL. The KemTex® ePTFE membrane has a unique microstructure of billions of randomly arranged pores. The membrane is supported by a polyester fibre fleece on which it is thermally fixed. Important note: When using original filters, the IFA W3 certification as well as the warranty of your device remain intact and valid.

15 m² Original replacement filter cartridge for MaxiFil Clean extraction unit consisting of polyester fleece with KemTex® ePTFE membrane and dust class M. Due to the finest pores of the KemTex® ePTFE membrane, even particles down to about 100 nanometres are retained with a high degree of separation. This achieves effective surface filtration with the best cleaning results. Important note: When using original filters, the IFA W3 certification as well as the warranty of your device remain intact and valid.

​

The original pre-filter cassette from KEMPER is used in the SmartMaster extraction unit. The pre-filter, which is quick and easy to install, has a filter area of 2.2 m².

The wall-mounted welding fume filtration system Wallmaster is a cost-effective filter solution for the modular setup of extraction systems. The filter medium integrated in a compact housing can be easily combined with both new and existing extraction elements. The SafeChangeFilter from KEMPER enables contamination-free filter changes, which also has a particularly high filter surface area of 42 square metres.

MaxiFil smoke extraction units combine large filter capacities with contamination-free filter change. The comfortable filter unit easily handles applications with medium amounts of smoke and dust. The wall-mounted version is also compact and is ideal for regular use on location

The fume extraction FilterTable is an affordable combination of working table and filter unit. The large work surface allows for effective work during welding and grinding with low to medium levels of smoke and dust. The extraction unit with disposable filter is designed for low to medium levels of smoke and dust and for occasional to frequent use.

The fume extraction FilterTable GWT is an affordable combination of working table and filter unit. The large work surface allows for effective work during welding and grinding with low to medium levels of smoke and dust. The device with disposable filter is suitable for occasional to frequent use.

Due to its differential pressure-controlled, automatic filter cleaning system, the stationary cartridge filter for welding fume extraction is suitable for high levels of smoke and dust and non-stop operation with low operating costs. The KemTex® ePTFE membrane filter cartridges for ultra-fine dust particles separate particles even below 0.1 µm. The two-exhaust arm version with integral dampers allows simultaneous or alternating work in two places with adjustable extraction performance.

KEMPER FilterCell XL extraction filter unit with time-controlled, automatic filter cleaning is suitable for extraction via a pipe on exhaust hoods, tables and robot cells. The device is designed for high levels of smoke and dust during non-stop operation. The KemTex® ePTFE membrane filter cartridge for ultra-fine dust particles separates particles even below 0.1 µm.

The solid yet compact welding smoke extraction system is ideally suited for factory buildings and welding shops with high levels of smoke and dust. Supplied ready to plug in and equipped with forklift pockets and lifting eyes, the WeldFil Compact is quickly installed as a central extraction and filter system for multiple welding work stations, cutting machines and welding robots. The KemTex® ePTFE membrane filter cartridges for ultra-fine dust particles separate particles even below 0.1 µm, and due to the W3/IFA Certification, the extraction filter unit WeldFil Compact is also suitable for use when machining chromium-nickel steel.

Robust, reliable and solid - the central extraction and filter WeldFil for high levels of smoke and dust. Ideally suited for large welding shops, training centres or for connecting to cutting machines. The KemTex® ePTFE membrane filter cartridges for ultra-fine dust particles separate particles even below 0.1 µm. If your requirements change, the system can grow flexibly by means of modular extensions.

The PlasmaFil filter system of the Automation-Line is supplied ready to use and can be set up and put into operation in just a few seconds thanks to its compact design. The particularly large filter surface enables a long service life, even with large amounts of dust. This makes it particularly suitable for extraction during plasma or flame cutting processes. Due to the different pipe connection options, the PlasmaFil can be tailored to the needs.

The PlasmaFil Pro filter system of the Automation-Line can be set up and put into operation in just a few seconds thanks to its compact design. The particularly large filter surface enables a long service life, even with large amounts of dust. This makes it particularly suitable for extraction during plasma or flame cutting processes. The filter unit is connected to the plasma or flame cutting table by means of a ducting system. The system is flexible in design and can be set up in many different locations. Thanks to the W3 certification (DIN EN ISO 21904) of the PlasmaFil Pro, it is possible to feed the filtered air directly back into the production hall, which makes it particularly energy-efficient.

The LaserFil filter system of the Automation-Line is supplied ready to use and can be set up and put into operation in just a few seconds thanks to its compact design. The particularly large filter surface is optimally adapted to the laser cutting process and enables an effective extraction capacity. The unit is connected via various duct connection options directly to a laser cabin that covers the entire working area. This is essential to prevent the cutting fume from spreading into the production hall.

The LaserFil Pro filter system of the Automation-Line is supplied ready to use and can be set up and put into operation in just a few seconds thanks to its compact design. The particularly large filter surface is optimally adapted to the laser cutting process and enables an effective extraction capacity. Thanks to the W3 certification (DIN EN ISO 21904) of the LaserFil Pro, it is possible to feed the filtered air directly back into the production hall, which makes it particularly energy efficient. The unit is connected directly to a laser cabin that covers the entire working area. This is essential to prevent the cutting fume from spreading into the production hall.

The ArcFil filter system of the Automation-Line is supplied ready to use and can be set up and put into operation in just a few seconds thanks to its compact design. Thanks to the high and effective extraction capacity, it is particularly suitable for robot welding applications of various processes, such as laser welding. The unit is connected via various duct connection options directly to an extraction hood or laser cabin that covers the entire working area of the robot. This is essential to prevent the cutting fume from spreading into the production hall.

The ArcFil Pro filter system of the Automation-Line can be set up and put into operation in just a few seconds thanks to its compact design. Thanks to the high and effective extraction capacity, it is particularly suitable for robot welding applications of various processes, such as laser welding. Thanks to the W3 certification (DIN EN ISO 21904) of the ArcFil Pro, it is possible to feed the filtered air directly back into the production hall, which makes it particularly energy efficient. The unit is connected directly to an extraction hood or cabin that covers the entire working area of the robot. This is essential to prevent the cutting fume from spreading into the production hall.

SparkTrap reliably prevents sparks, coarse particles and even cigarette butts from entering the filter system - with nearly 100 percent efficiency. By attaching this pre-separator, filter life is also increased by up to 300 percent. The optional spark detection increases safety by allowing the filter unit to be switched off automatically when a limit value has been exceeded.

Due to its modular design the KEMPER variohood exhaust hood for welding robots can be configured in a number of sizes. Due to the innovative air flow principle, the hood requires only a low flow rate to operate effectively. Flexible set-up options, for instance mounting on stands in the room, suspended from the ceiling or integrated into a movable robot gantry, offer plenty of scope for plant design.

Levelling platform for WeldFil, WeldFil Compact and PlasmaFil

Dusty Evo is very easy to use and a must for every workshop. With manual filter cleaning for fume extraction on extraction torch, slot and funnel nozzles. Thanks to the large handle the unit is also suitable for mobile use on construction sites and repair work. It is hardly larger than a small trolley.